Mayhem Bagger Handlebars for 2014-2023 Street Glide

The Mayhem Bagger is KST's original meat-hook bagger bar — the signature custom point on top with smooth round bends at the base, for an aggressive custom look that doesn't sacrifice comfort.

FITMENT

Designed for 2014–2023 Harley-Davidson batwing-fairing Touring models — Street Glide, Electra Glide, Ultra Classic / Ultra Limited and Tri Glide (KST's full fitment range for this bar is 1996–2023). Does NOT fit the 2023 CVO models.

Not sure it fits your bike? Email info@norcalbaggersupply.com — email is the fastest way to reach us — and we'll confirm before you order. You can also call 916-626-9030 (Mon–Fri, 9 AM–5 PM PT).

SPECIFICATIONS

• Material: 304 ornamental-grade stainless steel, CNC mandrel bent
• 1.25" diameter
• Width: 36.75" tip to tip, 6" pullback
• Rises: 10", 12", 14" and 16" (stock bars are 8")
• Notched and slotted for internal wiring and TBW; also fits non-TBW models
• Finishes: Polished stainless steel (hand polished — the look of chrome with the durability of stainless) or High Gloss Black powder coat, from the same supplier Harley-Davidson uses
• Can be purchased fully pre-wired — see KST's pre-wired options when you order

INSTALLATION

2014–2020 models: the 10" and 12" rises install without replacing the brake or clutch — you will need wire extensions (and heated-grip extensions if your bike has heated grips). With ABS, the 14" rise can be installed with some simple rerouting of the brake and clutch. 2021–2023 models: the 10" and 12" rises install with the stock brake and clutch (wire extensions needed); the 14" rise requires the clutch cable to be extended or replaced. Professional installation is recommended.

QUESTIONS RIDERS ASK

What is the “meat hook”?
It's KST's signature custom point at the top of the bar — the Mayhem's defining styling cue, paired with smooth round bends at the base.

Do I need new cables for a 12" rise?
No — on 2014–2023 models the 10" and 12" rises keep the stock brake and clutch; you will need wire extensions.

Will this fit my 2024 Street Glide?
No — 2024 and later Street Glides take the new-generation fitment. This bar covers the 2014–2023 batwing bikes.

PRE-WIRED OPTION

As listed, this bar ships unwired — there is no pre-wired selection on this listing. The pre-wired route for this bar is the separate KST Fully Pre-Wired Bundle for 2014–2023 Touring: add the bundle to your cart along with this handlebar, and the bar is loaded with the left and right hand switch harnesses, the throttle-by-wire sensor harness, and a heated-grip splice if needed before it ships. The bundle's extended full-length harness accommodates handlebars up to 16" and does not require an additional CAN bus wire extension, and its heated-grip choices include new Avon Air Cushion heated grips. The bundle must be purchased together with a handlebar.