Hawg Halters Hand Controls — Brake Side

HHI's brake-side hand control: a superbly styled and engineered billet control with sleek lines, smooth curves and hidden hardware in a compact package. Per HHI, choose the bore for your brake setup: 9/16-inch for single-disc applications, 11/16-inch for dual-disc, or 5/8-inch for dual-disc 2008-and-later Touring models. The lever pivot uses nylon bearings and spring loading for smooth, no-rattle operation, with a recessed cover and flex-type seal for leak-proof operation. Note (per HHI): the brake-side master cylinder does not have a built-in brake light switch. Order the clutch side separately — cable and hydraulic versions are listed in our store.

FITMENT

Custom hand-control application (per HHI): the controls fit handlebars up to 1-1/2-inch diameter and work with standard throttle and hand-grip components on 1-inch bars. Bore guidance (per HHI): 9/16-inch — single disc; 11/16-inch — dual disc; 5/8-inch — dual disc on 2008-and-later Touring models. HHI publishes no model-year range for this control — email us your year, model and brake setup before ordering and we'll confirm the bore.

Not sure it fits your bike? Email info@norcalbaggersupply.com — email is the fastest way to reach us — and we'll confirm before you order. You can also call 916-626-9030 (Mon–Fri, 9 AM–5 PM PT).

SPECIFICATIONS

• Manufacturer: Hawg Halters Inc (HHI) — part number family HBMA
• Side: brake (right) side only — clutch side sold separately
• Master cylinder bores (per HHI): 9/16-inch (single disc), 5/8-inch (dual disc, 2008-later Touring), 11/16-inch (dual disc)
• Features (per HHI): nylon-bearing, spring-loaded lever pivot; recessed cover with flex-type seal; hidden hardware
• Note (per HHI): no built-in brake light switch in the brake-side master cylinder
• Rebuild kits: MCRK-001 (9/16-inch), MCRK-003 (5/8-inch brake), MCRK-002 (11/16-inch) — listed in our store
• Made in the USA

INSTALLATION

Hand-control and master-cylinder work affects braking and clutch operation — installation by a qualified service technician is recommended. Follow HHI's instructions and your Harley-Davidson service manual for lever/master-cylinder mounting, cable or hydraulic line routing, and brake bleeding. No official Hawg Halters install video exists for this product — installation is manual-only.

QUESTIONS RIDERS ASK

Which bore does my Touring bike need?
Per HHI: 5/8-inch for dual-disc 2008-and-later Touring models. Single-disc setups take 9/16-inch, and other dual-disc setups take 11/16-inch.

Does it include the clutch side?
No — this listing is the brake side only. The matching cable-clutch and hydraulic-clutch sides are separate listings in our store.

Does the master cylinder have a brake light switch?
No — per HHI, the brake-side master cylinder does not have a built-in brake light switch.